Warm congratulations on the success of our "high speed cutting machine"!

The most expensive business:
Hello everyone!
In recent years, our company in order to meet the needs of the welding industry has developed some new products, such as 250 tons, 40 tons of hydraulic spraying machine hydraulic briquetting machine, type 146 wire feeding machine, 150 liter mixing machine, sealing machine, high speed cutting, high speed cutting machine units and so on, will be produced by our company to do introduction.
The high speed cutting machine is more efficient than the ordinary shredder, and a high speed cutting machine is equivalent to the efficiency of 4 to 5 common cutting machines. And the high speed cutting machine is less vulnerable parts, low maintenance cost, both labor and labor saving, the economic effect is very obvious. At present, our government has intensified efforts to deal with the pollution problem. The noise that we use now is more than 90 decibels. Noise pollution has become a serious social problem. High speed cutting machine has the characteristics of low noise and high efficiency. So the old shredder is replaced in time.
The high speed shredding machine produced by our company is designed according to the advantages of the similar products abroad, and it is very mature in technology. The unit by degreasing device, auxiliary machine, high speed cutting machine, taking over the machine, blanking device. The electric apparatus can be used directly with the wire drawing unit by using the frequency conversion speed regulation. In order to adapt to different user's production habits, there are two kinds of blanking devices for you to choose.
In order to let you know more about our company's products, let's take this opportunity to talk about the difference between our company and some high-speed shears in the industry.
(1) production aspects
According to the specification of 3.2 electrode as an example, the yield of the products of our company are 1000 / min, is currently used in the industry of high yield is 700 per cent.
This is because our company is high straightening mechanism widely used in the international group of the two groove wheel alignment, the method of wire resistance is small, so the production efficiency is high. While the high straightening mechanism is currently used in the industry with the traditional straightening shaft structure, its disadvantage is the wire resistance and welding surface easy to scratch, so the production efficiency is low.
(two) the aspect of noise
We know that the noise source of traditional wire cutter in our welding industry is derived from the cut-off mechanism and straightener. To solve the noise problem, we need to start with these two aspects.
The traditional straightening method is still used in the industry at present, and it is obvious that the noise problem has not been solved fundamentally. Our high cut from the structure to eliminate the straightening device during rotation due to noise of high speed rotation, drive the knife in the cutting process, only the regular and broken wires in a very low voice, compared with the products of our company in the field of environmental protection has obvious advantages.
(three) cut off the quality
Currently used in the industry in the process of high cut wire break end have obvious indentation and horseshoe shape and straightening effect is not ideal, the quality of high speed cutting machine cut off some of our products is better than that of industry. In addition, large diameter so high inertia knife I produced disc, work better.
(four) scope of application
The cutting length is divided into three specifications of 350, 400 and 450 mm, and the cut diameter is 2.5, 3.2, 4, and 5 mm, four.

Shijiazhuang Jinlong welding complete equipment Co., Ltd.